Citizen CT-S280 - 2-Dimensional Code Commands

- 311 -
2.2.17 2-dimensional code Commands
GS ( k pL pH cn fn [parameter]
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Setting and printing 2-dimensional code
[Outline] [The specification which is commontothemodel]
•Executes processing specified by function code (fn) with the 2-dimensional code specified
by cn.
•2-dimensional codes selectable with the value of cn are shown below.
cn 2-dimensionalcode
48 PDF417
49 QRCode
•Executes various processing related to 2-dimensional code specified by fn.
cn fn Code
Function
No.
Function
65 GS (k pL pHcn fn n Function65 Sets the number of digits of PDF417.
66 GS (k pL pHcn fn n Function66 Sets the number of steps of PDF417.
67 GS (k pL pHcn fn n Function67 Sets the module width of PDF417.
68 GS (k pL pHcn fn n Function68 Sets the height of the step of PDF417.
69 GS (k pL pHcn fn mn Function69 Sets error correction level of PDF417.
70 GS (k pL pHcn fn m Function70 Sets the option of PDF417.
80
GS( kpL pH cnfn m
d1… dk
Function80
Stores received data to symbol storage
area*.
81 GS (k pL pHcn fn m Function81
Prints 2-dimensional code data* of
2-dimensional code data storage area.
48
82 GS (k pL pHcn fn m Function82
Sends size information of
2-dimensional code data in
2-dimensional code data storage area.
cn fn Code
Function
No.
Function
65 GS( kpLpHcn fnn1n2 Function165 Specifies QRCode model.
67 GS( kpLpHcn fnn Function167 Sets the size of QRCode module.
69 GS( kpLpHcn fnm n Function169 Sets error correction level of QRCode.
80
GS( kpL pH cnfn m
d1… dk
Function180
Stores received data to 2-dimensional
code data storage area.
81 GS( kpLpHcn fnm Function181
Prints 2-dimensional code data in
2-dimensional code data storage area.
49
82 GS( kpLpHcn fnm Function182
Sends the size information of
2-dimensional code data in
2-dimensional code data storage area.
* 2-dimensional code data storage area ... Indicates the area where [cn=48: Function
80] , and [cn=49: Function 180] data are
stored.
* 2-dimensional code data ... Indicates data (d1 ... dk) of [cn=48: Function 80] ,
[cn=49: Function 180] .