Citizen CT-S280 - Fn=82: Function 182 Sending the Size of 2 D Code Data in 2 D Code Data Storage Area

- 322 -
fn=82: Function 182 Sending the size of 2D code data in 2D code data storage area
GS ( k pL pH cn fn m
[Code] <1D>H<28>H<6B>H<pL><pH><cn><fn><m>
[Range] (pL+pH×256)=3(pL=3,pH=0)
cn=49
fn=82
m=48
[Outline] [The specification which is commontothemodel]
• Sends the size information when printing 2-dimensional data stored in the 2-dimensional
code data storage area.
Hex Decimal Data size
Header 37H 55 1byte
Identifier 2FH 47 1 byte
Horizontal size 30Hto39H 48 to 57 1 to5 bytes
Separator 1FH 31 1byte
Vertical size 30H to39H 48to 57 1 to5 bytes
Separator 1FH 31 1byte
Fixed value 31H 49 1byte
Separator 1FH 31 1byte
Other info 30H or31H 48or49 1byte
NUL 00H 0 1 byte
•“Horizontal size” and “Vertical size” indicate the number of dots of QRCode.
•Other info indicates whether symbol is printable or not.
Hex Decimal Information
30H 48 Printable
31H 49 Not printable
[Caution] [The specification which depend on the model]
•QRCode is not printed with the processing of this function.
•Quiet zone (blank area around QRCode symbol) is not included in the size information.