Citizen CT-S280 - GS 8 L P1 P2 P3 P4 M Fn [Parameter]

- 157 -
GS ( L pL pH m fn [parameter]
GS 8 L p1 p2 p3 p4 m fn [parameter]
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Specifying graphics data
[Code] <1D>H<28>H<4C>H<pL><pH><m><fn>
<1D>H<38>H<4C>H<p1><p2><p3><p4><m><fn>
*In theexplanationof function, thecode of GS( Lisused.
•GS (L andGS 8L) are thesame function.
•When [parameter] exceeds 65533 bytes in each function, GS 8Lis used.
[Outline] [The specification which is commontothemodel]
•Executes theprocessing related to the graphics data specified by thefunction code (fn).
fn Code
Function
No.
Function
0,48 GS (LpLpH mfn Function48
Sends NVgraphicsmemory
capacity.
2,50 GS (LpLpH mfn Function50
Prints graphics data stored in print
buffer.
3,51 GS (LpLpH mfn Function51
Sends the remaining amount of NV
graphics memory.
64 GS( LpL pHm fn d1d2 Function64
Sends key code list of defined NV
graphics.
65 GS( LpL pHm fn d1d2 d3 Function65
Erases all data of NV graphics in a
lump.
66 GS( LpL pH mfn kc1 kc2 Function66
Erases thespecifiedNV graphics data.
67
GS(LpLpHmfnakc1kc2bxLxHyL
yH [c d1…dk] 1… [cd1…dk] b
Function67
Defines raster graphics data to NV
memory.
69 GS( LpL pHm fn kc1kc2 xy Function69 Prints the specified NV graphics.
112
GS( LpL pH mfn abx bycxL xH yL
yHd1…dk
Function112
Stores raster graphics data to print
buffer.
•pL,pHspecifiesthe number of bytes or“m” andlaterto(pL+pH×256).
[Caution] [The specification which is commontothemodel]
•Frequentuse ofthiscommandmayresult indamageof NV memory.Usethe Write commandto
NV memory inconsideration of [10timesmax./day] .
•Followingthe processingof thiscommand,printerBusymay occur during writingdata inNV memory.While
the printer isBusy,itstops receivingprocess.Therefore, data transmission (includingreal-time command)
from host is prohibited.