Citizen CT-S280 - Fn=1, 49: Function 1 Copies the Set Value Stored in Work Area to the Storage Area; Fn=2, 50: Function 2 Copies the Set Value Stored in Storage Area to the Work Area

- 308 -
fn=1, 49: Function 1 Copies the set value stored in work area to the storage area
GS ( M pL pH fn m
[Code] <1D>H<28>H<4D>H<pL><pH><fn><m>
[Range] (pL+pH×256)=2 (pL=2,pH=0)
fn=1,49
m=1, 49
[Outline] [The specification which is commontothemodel]
•Copiestheset value stored inworkarea tothe storagearea.
[Caution] • Thiscommandallowswriting tonon-volatile memory.Therefore, usingthis command frequently
may result inbreakageofnon-volatile memory. Usethis command appropriately [10times max./day] .
•During executionof thiscommand,the printer isin Busystate and stops receiving operation. Therefore, data
transmissionfrom thehost is prohibited.
fn=2, 50: Function 2 Copies the set value stored in storage area to the work area
GS ( M pL pH fn m
[Code] <1D>H<28>H<4D>H<pL><pH><fn><m>
[Range] (pL+pH×256)=2 (pL=2,pH=0)
fn=2,50
m=0, 1, 48, 49
[Outline] [The specification which is commontothemodel]
•Changesthesetvalue of work area bythe value of“m”.
m Function
0,48
Sets allsetvalues ofworkarea totheinitialvalue described in thespecification.
1,49
Copiesthe setvalue stored instoragearea tothe workarea.
When there is no set value in storage area, sets the value to the initial value described in the
specification.