Citizen CT-S280 - Line Feed Span Commands; Esc 2

- 97 -
2.2.5 Line Feed Span Commands
ESC 2
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMU series
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Specifying 1/6-inchline feed rate
[Code] <1B>H<32>H
[Outline] [The specification which depend on the model]
CT-S280/CT-S281/CT-S300/CT-S310/BD2-2220/PMU series
CT-P29x series
Theline feed rate perline isspecified by 1/6inch.
CT-S2000/CT-S4000/CT-S801/CT-S851/CT-S601/CT-S651/CT-S301II
Theline feed rate perline is specified by MSW5-2setting.
[Caution] [The specification which is commontothemodel]
•Line feedrate canbespecified respectivelyfor both STANDARD MODE andPAGE MODE.
[Default] [The specification whichdepend on the model]
CT-S280/CT-S281/CT-S300/CT-S310/BD2-2220/PMU series
CT-P29x series
Approx.4.23mm (1/360inches)
CT-S2000/CT-S4000/ CT-S801/CT-S851/CT-S601/CT-S651/CT-S301II
(1) MSW5-2 OFF:
Approx.4.23mm
(2) MSW5-2 ON:
Approx.3.75mm