- 191 -
FS FF
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Printing and feeding black marl/label paper to manual cut position
[Code] <1C>H <0C>H
[Outline] [The specification which is common to the model]
1.Printerfeeds theprintedblack mark/label papertothepositionformanual cutor peelingoff.
2. If FEED switch is pressed at manual cut position, printer feeds the paper back to top print position of black
mark/label.
3.Ifprinterreceivesprintdataatmanualcutposition,printerfeedsthepaperbacktotopprintpositionofblack
mark/label, thenprints thedata.
4.Thisfunction worksregardlessof auto cutter settingtobe enabled/disabled.
[Caution] [The specification which is commontothemodel]
•Valid onlyifBlack markpaper/ labelpaper isselected.
[See Also] FF, GS <
To Next Page
Loading...
