Citizen CT-S280 - Msw11

- 431 -
4.2.11 MSW11
●MSW 11-1： Presenter
[Outline] Set the enable/disable of thePresenter Function.
OFF(0) ON(1)
Presenter
Invalid Valid
ON(1) OPERATION:Presenter function is enabled and presenter works based on the setting of
MSW11-2 to MSW11-5.
OFF (0) OPERATION:Presenter functionis disabled and presenter does notwork.
●MSW11-2： Retract Function
[Outline] Set the enable/disable of the Retract Function.
OFF(0) ON(1)
Retract Function
Invalid Valid
ON(1) OPERATION: Retract Function is enabled.
Printer retracts the receipt either automatically in specified time from receipt ejection
or immediately upon receiving GS R command. The direction (front or back) of
retraction is set by MSW11-3.
OFF (0) OPERATION: Retract Function is disabled.
*Default time for automatic retraction is 5seconds
Thetimeto retract receiptfrom receipt ejection canbeset by customized value command GS ( Eor GS
R 1 command. The setting by GS R 1 is cleared by power off.
●MSW11-3： Retract Direction
[Outline] Set the direction of paper retraction when the retraction function is enabled. (MSW11-2 = ON)
OFF(0) ON(1)
Retract Direction Rear Front
ON(1) OPERATION:Paper is put out forward.
OFF (0) OPERATION:Paper is put out backward.