- 409 -
4.2.2 MSW2
●MSW2-1: Reserved [Fixed to ON(1)]
●MSW2-2: Auto-cutter operation
[Outline] Select auto-cutterenable/disable.
OFF(0)
ON(１)
Auto Cutter Invalid Valid
ON(1) OPERATION: Auto-cutterenabled
OFF (0) OPERATION:Auto-cutterdisabled
●MSW2-3: Buffering
[Outline] Select buffering print enable/disable.
OFF(0) ON(1)
Spool Print Invalid Valid
ON(1)OPERATION:Bufferingprintisenabled.Bufferingprintmeansthat savea certainamountofprintbuffer
to internalRAM for collectiveprinting
・ Save acertain amount ofprintbuffertointernalRAM for collectiveprinting.
・ IfcutcommandsuchasGS+V ESC+iESC +m areentered,printstarts evenbefore
the specified amount is reached. FF or GS+FF command In Black mark mode or
labelmodel works same way.
・ Even if no cut command is entered and the entered data does not reach the
specifiedamount,entereddata to printbufferisprintedafter no newdatacomesto
print buffer forcertainperiod.
OFF (0) OPERATION:Buffering print is disabled.
To Next Page
Loading...
