- 52 -
2.2 Command Details
2.2.1 Description of Items
XXXX
support model
[Function] Thename of acommand.
[Code] Thestringofcodescomprisingthecommandisrepresentedby<>Hforhexadecimalnumbers,<>Bforbinary
numbers, and< >for decimal numbers, [ ] kdenotesthe number of repetition of“k” times.
[Range] Indicates thevalues (setting range) ofarguments of thecommand.
Note: Ifvaluesoutsidethedefineddomainspecifiedwithcontrolcodesareused,malfunctionscouldpossibly
occur, sobe sure to usethe values within thedefined domain.
*The defined domain may differ depending on the model or printer setting.
[Outline] [The specification which is common to the model]
Indicates command functions common to relevant models.
[The specification which depend on the model]
Indicates the command function dependent on the model.
[Caution] Describes important points andcautionarynotes, asrequired.
[Default] Initial values for the command ifit hasarguments.
[See Also] Describes commandsrelated tothe commandwhen it isused.
[Sample Program]
Describes examples of coding on Quick-Basic.
*Examplesareonly for reference.Theymay varydepending on languageand version. Fordetails, please refer toa manual
inyourlanguage.
[PrintResults]
Describestheprintresultsobtainedbyexecutingtheaboveprograms.However,theprint results shownaredifferentinscale
from actual print results
To Next Page
Loading...
