- 338 -
GS I n
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Sending theprinter ID
[Code] <1D>H<49>H<n>
[Range] CT-S280/BD2-2220
1≤n≤3,49≤n≤51,65≤n≤67,n=69, 112
CT-S281/CT-S300/CT-S310/CT-S2000/CT-S4000/CT-S801/CT-S851
CT-S601/CT-S651/PMU series/CT-P29x series/CT-S301II
1≤n≤4,49≤n≤52, 65≤n≤67,n=69, 112
[Outline] [The specification which is commontothemodel]
•Sends thespecifiedprinterID.
[Caution] [The specification which is commontothemodel]
•Under DTR/DSR control, the printer sends theprinterIDafter verifyingthat thehostisready to
receive.
•Ifthehostis notready toreceive,theprinterwaitsforthehost to become readytoreceive.
• Under XON/XOFFcontrol, the printer sends the printer ID without checking whether or not the host is ready
to receive.
• Because this command is executed when data is mapped in the receive buffer, there may be a delay
between commandreceivingandprinter IDsending dependingon theconditionof thereceive buffer.
•IfASB(AutomaticStatus Back) is enabledbyGS a,the host mustdiscriminatebetween theprinterIDdue to
this commandandthe status duetoASB.
[The specification which depend on the model]
CT-S281/CT-S300/CT-S310/CT-S2000/CT-S4000/CT-S801/CT-S851
CT-S601/CT-S651/PMU series
•Sending the Blackmark length isvalidonlywhen Black mark paper isselected.
To Next Page
Loading...
