- 87 -
ESC T n
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMU series
supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Selecting thecharacter printing direction in PAGE MODE
[Code] <1B>H<54>H<n>
[Range] 0≤n≤3,48≤n≤51
[Outline] [The specification which is commontothemodel]
•Selectsthe directionandstart point ofcharacterprintinginPAGE MODE.
n Printing Direction Start Point
0,48
Left toright Topleft(“A” in thefigure)
1,49
Bottom to top Bottom left(“B” in thefigure)
2,50
Right toleft Bottom right (“C”in thefigure)
3,51
Topto bottom Topright(“D” inthe figure)
[Caution] [The specification which is commontothemodel]
•When STANDARD MODE is selected, thiscommandonlyexecutes the internal flagging ofthe
printer without affecting the printing inSTANDARD MODE.
•The character mappingpositionwill be the start point ofthe print area specifiedbyESCW.
•The basiccalculation pitch(xory) used by thefollowingcommands varies with the startpoint.
(1)Ifthestartpointisthetopleft or bottomright (Thecharacters are mappedin thedirection perpendicular
to the paperfeed),
•Commands usingx:ESCSP,ESCS, ESC
\
•Commands usingy: ESC3,ESCJ,GS $,GS
\
(2) If thestart point isthetoprightor bottom left (Thecharacters are mapped inthepaperfeed direction),
•Commands usingx:ESC3, ESCJ,GS $,GS
\
•Commands usingy: ESCSP,ESC S,ESC
\
[Default] n=0
[See Also] Appendix5.1 “Explanationon PAGE MODE”
ESC $, ESCL, ESCW, ESC
\
,GS $, GSP, GS
\
A
Paper feeddirection
D
B
To Next Page
Loading...
