- 397 -
4.1.11 PMU2XXX
No. Setting OFF ON
MSW1-1 Power ON Info ● Valid Not send
MSW1-2 Buffer Size ● 4K bytes 45 bytes
MSW1-3 Busy Condition ● Full/Err Full
MSW1-4 Receive Error ● Print “?” No Print
MSW1-5 CR mode ● Ignored LF
MSW1-6 Reserved ● Fixed -
MSW1-7 DSR Signal ● Invalid Valid
MSW1-8 Reserved ● Fixed -
MSW2-1 Reserved - ● Fixed
MSW2-2 Auto Cutter Invalid ● Valid
MSW2-3 Spool Print ● Invalid Valid
MSW2-4 Full Col Print ● LineFeed ● WaitData
MSW2-5 Resume aft PE ● Print next line Print top line
MSW2-6 Paper Width ● 80mm 58(60)mm
MSW2-7 Reserved ● Fixed -
MSW2-8 PNE Sensor Valid ● Invalid
MSW3-1 Resum Cttr Err ● Valid Invalid
MSW3-2 Reserved ● Fixed -
MSW3-3 Parallel 31 Pin ● Valid Invalid
MSW3-4 Paper Select ● Thermal Black MK
MSW3-5 Reserved ● Fixed -
MSW3-6 Reserved ● Fixed -
MSW3-7 Reserved ● Fixed -
MSW3-8 Resum Open Err ● Close Command
MSW4-1 Auto Length ● Invalid Auto
MSW4-2 Auto Loading Invalid ● Valid
MSW4-3 FEED&CUTatTOF Invalid ● Valid
MSW4-4 Base style ●PMU2xx0/2 PMU2xx1
MSW4-5 Mechanism mounted ●LT-23xx LT-22xx
MSW4-6 Reserved ● Fixed -
MSW4-7 Reserved ● Fixed -
MSW4-8 Partial only ● Invalid Valid
MSW5-1 Reserved ● Fixed -
MSW5-2 Reserved ● Fixed -
MSW5-3 Reserved ● Fixed -
MSW5-4 Reserved ● Fixed -
MSW5-5 Reserved ● Fixed -
MSW5-6
Speed/Quality Quality
● Speed
MSW5-7 Reserved ● Fixed -
MSW5-8 Reserved ● Fixed -
●: Factory setting
To Next Page
Loading...
