Citizen CT-S280 - Other Commands; DLE ENQ N

- 329 -
2.2.19 Other Commands
DLE ENQ n
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Real-time request toprinter
[Code] <10>H<05>H<n>
[Range] 0≤n≤ 2
[Outline] [The specification which is commontothemodel]
•The printer respondsin real-time totherequest that the host specifieswith number “n”.
n Function
0
At thesetting ofexecutionof GS^bytheFEED switch, the same processing as that pressingthe
FEED switch onceiscarriedout.
1
Afterrecoveringfromanerror,theprinter resumesprintingfromthebeginning ofthelinewherethe
erroroccurred.
2
Theprinter clearsthereceivebuffer andtheprint buffer, andthenrecoversfrom the error.
[Caution] [The specification which is commontothemodel]
•(n= 1) or(n= 2) shall beusedafter removingthe error.
•Ifanother data string of<10>H<05>H<n>(1≤ n≤2) isreceived,the printer acts thesame wayas with
this command.Therefore, theusershould beremindedof thisfact.
[Example 1]
Supposea command“ESC *mnL nH [d1 ...dk]”, where d1= <10>H, d2= <05>H,d3 =<01>H.
•The DLE EOTn commandcannot beinterleaved into the code string ofanother commandconsistingof2
bytesor more.
[Example 2]
IftheprintersendsDLEENQ nafter thehost hassentuptoESC 3initsattempttosendESC 3n,theprinter
handlesthe ESC 3as ESC3 <10>H.Thus,theuser should be cautious.
•Thiscommandis ignoredduring transmission ofblockdata.
[See Also] DLE EOT