- 82 -
GS B n
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMU series
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Specifying/cancelingthe black/white invertedprinting
[Code] <1D>H<42>H<n>
[Range] 0≤n≤255
[Outline] [The specification which is commontothemodel]
•Thiscommandspecifiesorcancels the black/white invertedprinting.
•“n”is valid onlyfor the lowest bit (n0).
•Controlby thelowestbit (n0)isshownas follows:
n0 Function
0
Theblack/white invertedprintingis canceled.
1
Theblack/white invertedprintingis specified.
[Caution] [The specification which is commontothemodel]
•The black/whiteinversionworks oninternal anddownloaded characters.
•The black/whiteinversionworks alsoontheright spacing ofcharacters defined byESCSP.
• This command does not affect the bit image, downloaded bit image, bar code, HRI characters, or the skip
areaspecified by HT,ESC $,or ESC \.
•Thiscommanddoes not affect the space between lines.
•Black/whiteinversionspecificationtakesprecedenceoverunderlinespecification.Underlineprintingspecifiedis,
therefore,nullified ifblack/white inversionis specified; the underline setting,however,remains unchanged.
[Default] n=0
To Next Page
Loading...
