- 332 -
ESC = n
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Data input control
[Code] <1B>H<3D>H<n>
[Range] 0≤n≤255
[Outline] [The specification which is commontothemodel]
•Selecting equipment for which data inputfrom thehost is valid.
•Each bitof “n”indicatesasfollows.
•When the printer hasnot been selected, thisprinterabandonsall thereceived data until it isselected by this
command.
Value
Bit Equipment
0 1
0
Printer Invalid Valid
1
Not defined — —
2
Not defined — —
3
Not defined — —
4
Not defined — —
5
Not defined — —
6
Not defined — —
7
Not defined — —
[Caution] [The specification which is commontothemodel]
•Even whentheprinterhas notbeen selected, it canbecomeBUSYstatethrough printer
operation.
•Whenthe printer is deselected,this printer discardsall the data until itis selected withthis command.(Except
DLE EOT,DLEENQ, andDLE DC4)
[Default] n=1
To Next Page
Loading...
