Citizen CT-S280 - Msw8

- 425 -
4.2.8 MSW8
●MSW8-1: Print width
[Outline] Selects theprint width in dots.
Setting Value
Print Width
832dots,720dots, 660dots, 640dots, 576dots,
512dots,436dots, 432dots, 420dots, 384dots, 360dots,
390dots,546dots
●MSW8-2: Paper type
[Outline] Selects thepaper typeused.
Setting Value
Paper Type
1Color Normal, 1ColorBM,1 Color Label,
2colorNormal, 2Color BM
●MSW8-3： Top Margin
[Outline] Selects thetopmarginsetting
Setting Value
Top Margin
11mm, 3mm,4mm,5mm, 6mm,7mm, 8mm,
9mm, 10mm
Select the length of top margin
Remarks:When cuttingis performedatthe endofprinting,lastprinted lineis fed tocutterposition.
Thus top margin area where printer cannot print isgenerated at the top of next printing. This
function isto save the paper by feeding paper backward at the starting printing.
●MSW8-4： Line Gap Reduce
[Outline] Selects theline gapreductionratio
Setting Value
Line Gap Reduce
Invalid, 3/4, 2/3,1/2,1/3,1/4,1/5, ALL
This is the function to save the paper by reducing gap between lines which do not affect the print
resultt too much.
Invoid: No reduction
3/4 to 1/5: Reduction ratio from original line gap setting
ALL: No gap between lines