Citizen CT-S280 - ESC M

- 139 -
ESC m
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Partial cutting ofpaper
[Code] <1B>H<6D>H
[Outline] [The specification which is commontothemodel]
•Executes partialcutting ofpaper.
[Caution] [The specification which is commontothemodel]
•Thiscommandonlyworks it isentered atthe beginning of aline.
•Before cutting paper,feed thepaper more thanthe cutting position ofpaper from the print position. Without
this paper feeding,thecharacter justafter printingremains before thecutter.
[The specification which depend on the model]
CT-P290/292
•Thiscommanddoesnotfunction.
CT-S300/CT-S310/CT-S2000/CT-S4000/CT-S801/CT-S851
CT-S601/CT-S651/PMU series
•With label- or BM-supported model, this command does not function at the setting of BM
paper/label paper setting.
PMU2300III
•When presenter function is enabled, cut methodis automatically set for fullcut.
[Sample Program] [PrintResults]
Cut state
LPRINT“AAAAA”;
LPRINTCHR$(&H1B);"J";
LPRINTCHR$(150);
LPRINTCHR$(&H1B);"m";
AAAAA
Cut position
AAAAA
Paper feed
direction