Citizen CT-S280 - DC3 N (Valid in CBM-270-Compatible Mode)

- 77 -
DC3 n (Valid in CBM-270-Compatible Mode)
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMU series
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Specifies/cancelsprinting inred(black-based paper)
[Code] <13>H<n>
[Range] 0≤n≤255
[Outline] [The specification which is commontothemodel]
•Specifiesor cancels printing inred.
•Redprinting is validon black-basedthermalpaper.Specifies or cancelsprintinginblackonred-basedthermal
paper.
•“n”is valid onlyfor the lowest bit (n0).
•Controlby thelowestbit (n0)isshownas follows:
Function
n0
black-based paper red-based paper
0
Canceling redprinting. Cancelingblack printing.
1
Specifying redprinting. Specifyingblack printing.
[Caution] [The specification which is commontothemodel]
•Valid onlyat the top of aline.
•Thiscommandmust not beusedfor normalthermalpaper.
•Atthe time of setting,conductingpulse amount isincreasedtochange thecoloring.
•Incase of MSW3-7=OFF, thiscommandisinvalid.
•Valid onlyinstandard mode.
[The specification which depend on the model]
CT-S281
When normal thermal paper mode is specified, thecommandis used, itbecomes2-color papermode.
It executes command <ESC @> or becomeseffective untilturning offpower.
CT-S280
•Depending on thesettingofMSW4-7,functionset by DC3command isswitchedas per thetable below.
MSW4-7:DC3 command function
n0
OFF=2 color printing ON=Black/Whitereverse
0 2color printing isinvalid B/W reverse printingisinvalid.
1 2color printing isvalid. B/Wreverse printingisvalid.
[Default] n=0
[Sample Program]
LPRINTCHR$(&H13);CHR$(1);