Citizen CT-S280 - Fn=48: Function 48 Set Kanji Fonts

- 180 -
FS ( A pL pH fn […]
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Setting font attribute ofKanji
[Outline] Setting Kanji font attribute meansexecutionofprocessingforKanji font attribute bythevalueof“fn” specified.
fn Function
48 Sets Kanji font
[Outline] [The specification which is commontothemodel]
This command iseffective onlyfor theJapanese Kanji specifications.
fn=48: Function 48 Set Kanji fonts
FS ( A pL pH fn m
[Code] <1C>H<28>H<41>H<pL><pH><fn>< m>
[Range] (pL+pH×256)=2 (pL=2,pH=0)
fn=48
0≤m≤2, 48≤m≤50
[Default] m=0
[Outline] [The specification which is commontothemodel]
Printsthe succeedingcharacters with energy setfor“m”.
This command iseffective onlyfor theJapanese Kanji specifications.
[The specification which depend on the model]
CT-S280/CT-S281/CT-S300/CT-S310/CT-S801/CT-S851/CT-S601/CT-S651
BD2-2220/PMU series/CT-P29x series/CT-S310II
m Function
0,48 Kanjifont A(24×24)
1,49 invalid
2,50 Kanjifont C(16×16)
CT-S2000/CT-S4000
m Function
0,48 Kanjifont A(24×24)
1,49 Kanji font B(20×24)
2,50 Kanjifont C(16×16)