Citizen CT-S280 - Page 338

- 337 -
GS ( A pL pH n m
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Execution of test printing
[Code] <1D>H<28>H<41>H<pL><pH><n><m>
[Range] (pL+(pH×256))=2(pL=2,pH=0)
0≤n≤2,48≤n≤50
1≤m≤4,49≤m≤52
[Outline] [The specification which is commontothemodel]
•Specified test printing will beexecuted.
•pL,pHwill specify thenumber ofsubsequent parameters by(pL+(pHx256))bytes.
•“n”willspecify the paperfortest printing inthefollowingtable.
n Category of Paper
0,48
Basicpaper (Paperrolls)
1,49
2,50
Paper rolls
•“m”will specify thecategoryof test printing inthe following table.
m Category of TestPrinting
1,49
Hexadecimal dump
2,50
Printer’sstatus printing
3,51 Rollingpattern printing
[The specification which depend on the model]
PMU2XXXII/PMU2300III/CT-P29x series
m Category of TestPrinting
1,49
Hexadecimal dump
2,50
Printer’sstatus printing
3,51 Rollingpattern printing
4,52
Memory Switch sitting printing
[Caution] [Thespecificationwhich is common to themodel]
•Thiscommandis onlyvalid whenprocessed attheheadofa line during the STANDARDMODE.
•The command willbeignored inPAGEMODE.
•During macro definition,ifthiscommandisprocessed, themacro definitionis suspended, andthecommand
starts being processed.
•Printerwillresetitsharddiskafterfinishingtestprinting.Therefore,theprintermakesdownloadcharacters,bit
map imagesandmacrosundefined,clearsthereception buffer/print buffer, andreturns thevarioussettings
to defaults.Atthis time, theDIPswitches areread again.
•Papercutting isperformed atthe end of test printing.
*Functions with cutter-mounted model and when cutter is set to be enabled.
•PrinterwillbeBUSY whenthe processingofthe command starts.