Citizen CT-S280 - Page 409

- 408 -
●MSW1-5: CR code
[Outline] Select theprinter when receivingCR(<0D>H) code.
OFF(0) ON(1)
CR mode Ignored LF
ON(1) OPERATION:
Selectthe same operationwith LF whenreceiving CR code.
Print data inprint buffer andput linefeedsasspecified.
OFF (0) OPERATION:
CR code may beignored with no actions ifreceiving CR code.
●MSW1-6: Reserved [Fixed to OFF (0)]
●MSW1-7: DSR signal
[Outline] Printer canbereset with DSR(serialI/F-6pin)signal. Select enable/disable ofreset functionwith thissignal.
OFF(0) ON(1)
DSR Signal Invalid Valid
ON(1) OPERATION: Used asreset signal
OFF (0) OPERATION:Not used asreset signal
●MSW1-8: INIT signal
[Outline] Printer canbereset with INIT(serialI/F-25Pin)signal. Select enable/disable ofreset functionwith thissignal.
OFF(0) ON(1)
INIT Signal Invalid Valid
ON(1) OPERATION: Used asreset signal
OFF (0) OPERATION:Not used asreset signal