- 407 -
●MSW1-3: Busy condition
[Outline] Select theconditionthat printer isBUSY. Automatic status send functionalso runs.
OFF(0) ON(1)
Busy Condition Buffer full/Off-line Buffer full
ON(1) OPERATION: Ifreceive buffer is full,printeris BUSY.
Automatic statussend(ASB) functionis enabled.
OFF (0) OPERATION:If receive buffer isfull or off-line, printer isBUSY.
Automatic statussend(ASB) functionis disabled.
[AdditionalDescription]
Evenif ONis selected, printer entersBUSYstatuswhen power isturned on orreset byI/For atself test print
Printer Status
MSW1-3
OFF
MSW1-3 ON
Power-up orreset usedby I/F
● ●
Self-print
● ●
Cover open
● -
Paper-feed byFEED SW
● -
Paper-end(includingprint stopinPNE)
● -
Errorgeneration
● -
Off-line
Waiting during macro run byFEEDSW
● -
Bufferfull Receive buffer full
● ●
●MSW1-4: Receiveerror character
[Outline] Select handling of data detected where the serial communication detects the receive data framing error,
overrun error andparity error.
OFF(0) ON(1)
Receive Error Print? NoPrint
ON(1) OPERATION: Notprintedas“?”
OFF (0) OPERATION:Printedas“?”
To Next Page
Loading...
