- 432 -
●ＭＳＷ 11-4： Store and Eject
[Outline] Set the function to eject the paper after storing the paper enabled/disabled.
OFF(0) ON(1)
Store and Eject
Invalid Valid
ON(1) OPERATION: When paper reaches the presenter roller, presenter does not eject the paper and
when paper length reaches maximum length, presenter ejects the paper.
OFF (0) OPERATION: When paper reaches the presenter roller, presenter start ejecting the paper
synchronously with paper feeding without storing the paper I the presenter.
●ＭＳＷ 11-5： No print with paper
[Outline] Set the printing next receipt enabled/disabled for the condition that presenter sensor detects paper
OFF(0) ON(1)
No print with paper
Invalid Valid
ON(1) OPERATION: Whilepresentersensor detects thepaper, printer doesnot printnextreceipt. Then
when printer detects no paper at presenter sensor, the next receipt is printed and
ejected.
OFF (0) OPERATION: Evenpresentersensordetectsthepaper,printerprintsthenextreceiptand ejectit.
●ＭＳＷ 11-6： Min Receipt Length
[Outline] Set the minimum length of receipt for the presenter function
OFF(0) ON(1)
Min Receipt Length 75mm 120mm
ON(1) OPERATION: Minimum receipt length for the presenter function is 75mm
OFF (0) OPERATION:Minimum receipt length for the presenter function is120mm
To Next Page
Loading...
