- 307 -
GS ( M pL pH fn m
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Customizing the printer
[Outline] [The specification which is common to the model]
• Executes processing related to escape/recovery of the value set in the work area or the data defined by
variouskindsof command.
fn Function
Function1
Copiesthe setvalue stored inworkarea tothe storagearea.
Function2
Copiesthe setvalue stored instoragearea tothe workarea.
Function3
Specifies theauto loading function ofthe set value at initialization tobe valid orinvalid.
•Work area:
Area wheredata isinitialized bypower OFFof resetting (initialize).Operation ismade inaccordance with
the data setinthisarea.
•Storage area:
Area wheredata isnot initializedbypower OFFor resetting (initialize).
Commandsfor this function
Command Type Command
Statusrelations
ESC c3, GSa
Macro registration
GS:
Charactertype
ESC M,ESC R,ESC t
Font attribute
ESC !,ESC–, ESCE,ESC G, ESCV,ESC {, GS!, GSB,
GSb, GS (N*
Line feed amount, character
space
ESC SP, ESC2,ESC3
Barcode
GSH, GSf,GS h,GS w
2-dimensionalcode(**) GS (k<fn65 to 70>
Print position
ESC D,ESCT, ESC a, GSL, GS W
Kanji control relations
FS!,FS &,FS (A, FS –,FS .,FS C,FS S, FS W
Other
ESC c4,ESC c5, GS (D,GS (H<fn49>,GS P
**… Supported with CT-S2000 and CT-S4000 label models.
*… Not supported with BD2-2220.
To Next Page
Loading...
