Citizen CT-S280 - Page 172

- 171 -
FS &
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Setting Kanjimode
[Code] <1C>H<26>H
[Outline] [The specification which is commontothemodel]
•Sets Kanji mode.
Japanese Kanji specifications:
This command isinvalid whenKanji code system isShiftJIS.
Kanji codes areprocessed inthe order ofthe first byte and second byte.
This codeisdefaulted tothe stateofcanceling Kanji mode.
[The specification which depend on the model]
CT-S280/CT-S300/CT-S310/CT-S2000/CT-S4000/CT-S801/CT-S851
CT-S601/CT-S651/CT-S310 II
Multilingualspecifications(Hangul,Chinese):
Kanji codes areprocessed inthe order ofthe first byte and second byte.
This codeisdefaulted tothe stateofsetting Kanji mode.
[See also] FS .,FS C
[Sample Program] [PrintResults]
LPRINTCHR$(&H1C);"&";
LPRINTCHR$(&H34);CHR$(&H41);
LPRINTCHR$(&H3B); CHR$(&H7A);
LPRINTCHR$(&HA);
LPRINTCHR$(&H1C);".";
LPRINTCHR$(&H34);CHR$(&H41);
LPRINTCHR$(&H3B); CHR$(&H7A);
LPRINTCHR$(&HA);
漢字
4A;z
When setting Kanji mode
When cancelingKanji mode