- 182 -
GS <
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310 II
[Function] Initializingthe printer mechanism
[Code] <1D>H<3C>H
[Outline] [The specification which is commontothemodel]
•Performs initializing operation atBlack mark/ label similartothe initializationat power on.
[Caution] [The specification which is commontothemodel]
•Thiscommandis valid onlywhenB.Mpaper/ labelis chosen.
•Parameters configuredbycommandsare not reset.
To Next Page
Loading...
