Citizen CT-S280 - Page 216

- 215 -
PMU2XXXII
• Setting MSW 4 (a=4)
n b (Set Value) Function
48
At the selection of Black mark paper, disables auto
end-measurement.
1
49 (Default)
At the selection of Black mark paper, enables auto
end-measurement.
48
At the selection of Black mark paper, sets sensor position to
be on the printing side.
2
49 (Default)
At the selection of Black mark paper, sets sensor position to
be on the back of the printing side.
48
Paper heading cut disabled.
3
49 (Default)
Paper heading cut enabled.
48
Base style is PMU2XX0/PMU2XX2.
4
49
Base style is PMU2XX1.
48
Mechanism name is LT-23XX.
5
49
Mechanism name is LT-22XX.
6 48 (Default) Reserved
7 48 (Default) Reserved
48(Default) Forcible partial cut disabled.
8
49 Forcible partial cut enabled (full cut by command: enabled).
* MSW 4-1, -2 are valid when MSW 3-4 is ON.
Setting MSW 5 (a=5)
n b (Set Value) Function
1 48 (Default) Reserved
2 48 (Default) Reserved
48 USB mode virtual serial.
3
49 (Default) USB mode printer class.
4 48 (Default) Reserved
5 48 (Default) Reserved
48 (Default) It is priority of the print quality.
6
49 Priority of the print speed.
7 48 (Default) Reserved
8 48 (Default) Reserved