- 257 -
CT-P29x series
• a=5: Sets printing density to the level specified by (nL+nH×256).
(nL+nH×256) Printing Density
65530 70%
65531 75%
65532 80%
65533 85%
65534 90%
65535 95%
0(Default) 100%
1 105%
2 110%
3 115%
4 120%
5 125%
6 130%
7 135%
8 140%
• a=6: Sets printing speed to the value specified by (nL+nH×256).
(nL+nH×256) Printing Speed
1 Printing speed level 1 (84%)
2 Printing speed level 2 (86%)
3 Printing speed level 3 (88%)
4 Printing speed level 4 (90%)
5 Printing speed level 5 (92%)
6 Printing speed level 6 (94%)
7 Printing speed level 7 (96%)
8 Printing speed level 8 (98%)
9 (Default) Printing speed level 9 (100%)
• a=213: Selects the flow control specified by (nL+nH×256) when virtual
COM is set.
(nL+nH×256) Flow control
1(Default) PC setting
2 DTR/DSR
3 XON/XOFF
• a=214: Select the enable/disable of Kanji specified by (nL+nH×256)
(nL+nH×256) Kanji
1 Invalid(OFF)
2(Default) Valid(ON)
• a=216: Select the JIS/Shift JIS specified by (nL+nH×256)
(nL+nH×256) JIS/Shift JIS
1(Default) JIS (ON)
2 Shift JIS(OFF)
• a=217: Select the international character set specified by (nL+nH×256)
(nL＋nH×256) Int’l Char set (nL＋nH×256) Int’l Char set
1(Default) U.S.A. 9 Japan
2 France 10 Norway
3 Germany 11 Denmark II
4 U.K. 12 Spain II
5 Denmark I 13 Latin America
6 Sweden 14 Korea
7 Italy 15 Croatia
8 Spain I 16 P.R. China
To Next Page
Loading...
