Citizen CT-S280 - Page 297

- 296 -
fn=7: Function 7 Copying User-defined Page
GS ( E pL pH fn a d1 d2
[Code] <1D>H<28>H<45>H<pL><pH><fn><a><d1><d2>
[Range] (pL+pH×256)=4 (pL=4,pH=0)
fn=7
a=10, 12, 17
[Outline] [The specification which is commontothemodel]
•Copiesthedata ofuser-defined code page inthe fontspecified by “a”.
•Configurationof customized value No.
d1 d2 Function
31 30
Loads the character codepage data specifiedby “a”instoragearea towork area.
30 31
Saves the character codepage data inworkarea tothe storage area ofthefont
specified by“a”.
•Work area: Area where data isinitialized bypower OFFor resetting (initialize).
Operationis made inaccordancewiththe data setinthisarea.
•Storage area: Area where data isnot initialized bypower OFFor resetting (initialize).
•User-defined code page: Page 255 (ESC t255)
•Thisfunction operates onlyin printer function setting mode.
[The specification which depend on the model]
CT-S300/CT-S310/CT-S801/CT-S851/CT-S601/CT-S651/ CT-P29x series
a
Font Type
10
Font B: 9(horizontal)×17 (vertical)
12
Font A:12(horizontal)×24(vertical)
17
Font C: 8(horizontal)×16 (vertical)
CT-S280/CT-S281/CT-S2000/CT-S4000/BD2-2220/ PMU series/CT-S310II
a
Font Type
10
Font B: 9(horizontal)×24 (vertical)
12
Font A:12(horizontal)×24(vertical)
17
Font C: 8(horizontal)×16 (vertical)