- 303 -
GS ( K pL pH fn m
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Selecting print control method
[Outline] [The specification which is commontothemodel]
Executes thesettingrelated tothe print control specifiedbythevalue of“fn”.
Function No.(fn) Function
Function49
Sets printingdensity.
Function50
Sets printingspeed.
Function97 Sets the numberof divisions forhead conducting.*
*fn=97issupported by onlyCT-S300, CT-S310
To Next Page
Loading...
