Citizen CT-S280 - Page 390

- 389 -
No.
Setting Default Set Values
MSW7-1 Baud Rate 19200bps
1200 bps, 2400bps, 4800bps, 9600bps, 19200bps,
38400bps,57600bps, 115200bps
MSW7-2 Data Length 8bits 7bits, 8bits
MSW7-3 Stop Bit 1bit 1bit,2bits
MSW7-4 Parity None None,Odd,Even
MSW7-5 Flow Control DTR/DSR DTR/DSR, Xon/Xoff
MSW7-6 DMAcontrol Valid Valid, Invalid
MSW7-7 VCom Protocol PC setting PCsetting, DTR/DSR,XON/XOFF
MSW8-1 Print Width 576dots
640dots,576dots, 512dots, 436dots, 432dots,
420dots,384dots, 360dots
MSW8-2 Paper Type
1Color
Normal
1Color Normal, 1ColorBM,1 Color Label,
2Color Normal, 2ColorBM
MSW9-1 Code Page PC437
PC437, Katakana,PC850,PC858, PC860,PC863,
PC865, PC852, PC866,PC857,WindowsCode,
Space page,PC864,ThaiCode18
MSW9-2 Int’Char Set America
America, France, Germany, England,Denmark,
Sweden,Italy,Spain, Japan, Norway, Denmark2,
Spain 2,LatinAmerica, Korea,Croatia, China
MSW9-3 Kanji OFF ON,OFF
MSW9-4 JIS/Shift JIS JIS JIS,ShiftJIS
MSW10-1 Print Density 100%
70%,75%, 80%,85%, 90%,95%, 100%,105%,
110%, 115%, 120%,125%,130%,135%, 140%
MSW10-2 Print Speed Level9
Level1, Level2, Level3,Level4,Level5,Level6,
Level7, Level8,Level9
MSW10-3 ACK Timing Before BUSY Before Busy, Same Period, After Busy
<<Differenceof MSW by the model>>
MSW4-4 andMSW4-5 aredifferentbythemodel asfollows.
Model Standard Blackmark model Label model
MSW4-4 OFF
Thermalpaper
ON
Black mark paper/ Label
paper
ON
Black mark paper/ Label
paper
MSW4-5 OFF
Blackmarkdetection
OFF
Blackmarkdetection
ON
Labeldetection