Citizen CT-S280 - Page 96

- 95 -
(2)Ifasufficientareacannotbeprovidedasaresultofstep(1),theprintareaisextendedtowardtheleft(so,
the leftmarginis decreased).
Printable area
A
Left margin (1) Extended
(2) The left margin istrimmed toward the right
Print area width
(3) If asufficient area cannot beprovidedasa result ofstep (2),theright spacing istrimmed.
•Whenmappinga bitimage(or downloadedbitimage),iftheprint area is narrower thanthe minimum width
ofthebit image(two dots for single density,or onedot for double density),onlythe lineforthat image is
handled as follows:
(1) The print area is extended toward the left (so, the left margin is decreased) until it is equal to the
minimumwidthof theimage,butnotwider than theprintable area.
[Default]
paper
width
print
width/(dot)
nL nH supportmodel
112mm 104mm/(832) 96 3 CT-S4000
112mm 90mm/(720) 208 2 CT-S4000
83mm 82.5/(660) 148 2 CT-S4000
83mm 80mm/(640) 128 2 CT-S2000/CT-S801/CT-S851/CT-S601/CT-S651
80mm 72mm/(576) 64 2
CT-S300/CT-S310/CT-S2000/CT-S4000/CT-S801/CT-S851
CT-S601/CT-S651/BD2-2220/PMU series/CT-P292/293/
CT-S310II
80mm 68.25mm(546) 34 2 CT-S801/CT-S851/CT-S601/CT-S651/CT-S310II
80mm 64mm/(512) 0 2
CT-S300/CT-S310/CT-S2000/CT-S4000
CT-S801/CT-S851/CT-S601/CT-S651/CT-S310II
60mm 54.5mm/(436) 180 1 CT-S2000/CT-S801/CT-S851/CT-S601/CT-S651
58mm 54mm/(432) 176 1
CT-S2000/CT-S4000/CT-S801/CT-S851/CT-S601/CT-S651
BD2-2220/PMU2XXX/PMU2XXXII
58mm 52.5mm/(420) 156 1 CT-S2000/CT-S801/CT-S851/CT-S601/CT-S651/CT-S310II
58mm 51mm(408) 152 1 CT-P290/291
58mm 48.75mm(390) 134 1 CT-S801/CT-S851/CT-S601/CT-S651/CT-S310II
58mm 48mm/(384) 128 1
CT-S280/CT-S281/CT-S300/CT-S310/CT-S2000
CT-S801/CT-S851/CT-S601/CT-S651
CT-P290/291/292/293/CT-S310II
58mm 45mm/(360) 104 1
CT-S300/CT-S310/CT-S2000/
CT-S4000/CT-S801/CT-S601/CT-S310II
[See Also] GS L, GSP