v2.13 Cleverscope CS300 Reference Manual
©Cleverscope 2004-2018 www.cleverscope.com Page 55
The averaging process that is currently selected will start again when the next frame is
captured
5.3.13 Display in dB [Settings Menu]
Click button to set the vertical axis of the Spectrum Display to display logarithmically in dB
instead of linear.
This menu option will show as “ticked” after being selected
Note: The exception to this is the Phase plot when Gain/Phase is selected for the Spectrum
Display because phase is always graphed in degrees or radians.
5.3.14 Display spectrum log frequency [Settings Menu]
Display
spectrum log
frequency
Click button to set the horizontal axis of the Spectrum Display to display logarithmically
instead of linear
To Next Page
Loading...