ComNav Commander P2 & P2VS Installation & Operation Installation
Document PN 29010074 V4.1 - 59 -
Other Equipment
You should install the remaining components of your P Series system according to the
installation instructions that come with that equipment:
•
Auxiliary Controllers
•
Jog Steering Controls
•
Rudder Angle Indicators
•
Wind Transducers
•
CT7 Thruster Interface or a Drive Box
•
Pumps & Drives
•
… and etcetera ...
Electrical wiring instructions for all these are a combination of the information in the manual
supplied with each piece of equipment, and specific information for the P Series Autopilot
which is given in the following sections of this chapter.
To Next Page
Loading...
