D-Link DWC-1000

D-Link DWC-1000 User Manual 107
Section 4 - Advanced WLAN Conguration
Congure AP Prole Radio
Path: Wireless > Access Point > AP Prole > AP Prole Radio
To accommodate a broad range of wireless clients and wireless network requirements, the AP can support up to
two radios. By default, Radio 1 operates in the IEEE 802.11a/n mode, and Radio 2 operates in the IEEE 802.11b/g/n
mode. The dierence between these modes is the frequency in which they operate. IEEE 802.11b/g/n operates in
2.4 GHz frequency, and IEEE 802.11a/n operates in 5 GHz frequency of the radio spectrum.
1. Click Wireless > Access Point > AP Proles > AP Prole Radio tab.
2. Right-click the radio you want to change, and click Edit.