D-Link DWC-1000

D-Link DWC-1000 User Manual 113
Section 4 - Advanced WLAN Conguration
Congure AP Prole SSID
Path: Wireless > Access Point > AP Proles > AP Prole SSID
The AP Prole SSID List page displays the virtual access point (VAP) settings associated with the selected AP
prole. Each VAP is identied by its network number and Service Set Identier (SSID). You can congure and
enable up to 16 VAPs per radio on each physical access point.
1. Click Wireless > Access Point > AP Proles > AP Proles SSID tab.
2. Select the AP Prole from the drop-down menu.
3. Select the Radio Mode.
4. Select the SSID name from the drop-down menu.
5. Enable/disable the SSID by right-clicking Enable or Disable.
Note: SSID ID 1 is always enabled. If you do not want to have the rst SSID enabled, you must create a new
SSID to be able to swap another SSID in the rst slot.