D-Link DWC-1000 User Manual 376
Section 10 - Troubleshooting
Log Settings
The wireless controller lets you capture log messages. You can monitor the type of trac that goes through the
wireless controller and be notied of potential attacks or errors when they are detected by the controller. The
following sections describe the log conguration settings and the ways you can access these logs.
Dening What to Log
Path: Maintenance > Logs Settings > Log Facilities
The Facility Logs page lets you determine the granularity of logs to receive from the wireless controller. Select
one of the following facilities: Kernel, System, Network, VPN, WCF, Firewall, Wireless Controller, and Captive Portal.
For each facility, the following events (in order of severity) can be logged:
Severity Description
Emergency System is unusable
Alert Action must be taken immediately
Critical Critical conditions
Error Error conditions
Warning Warning conditions