D-Link DWC-1000

D-Link DWC-1000 User Manual 241
Section 8 - Security
Custom Services
Path: Security > Firewall > Custom Services
Custom services can be dened to add to the list of services available during rewall rule conguration. While
common services have known TCP/UDP/ICMP ports for trac, many custom or uncommon applications exist in
the LAN or Option. In the custom service conguration menu, you can dene a range of ports and identify the
trac type (TCP/UDP/ICMP) for this service. Once dened, the new service will appear in the services list of the
rewall rules conguration menu.
To add, delete, or edit a custom service:
1. Click Security > Firewall > Custom Services.
2. Right-click an entry and click either Edit or Delete. To add a new schedule, click Add New Custom
Service.
Field Description
Name Enter a name for your custom service.
Type Enter the layer 3 protocol that the service uses (TCP, UDP, BOTH, or ICMP).
Port Type Select Port Range or Multiple Ports.
Start Port
If you selected Port Range, enter the rst (TCP, UDP or BOTH) port of a range that the ser-
vice uses.
Finish Port If you selected Port Range, enter the last port of a range that the service uses.
Ports If you selected Multiple Ports, enter the port or ports separated by a comma.
ICMP Type The ICMP type is a numeric value that can range between 0 and 40.
Save Click to save your settings.