D-Link DWC-1000

D-Link DWC-1000 User Manual 337
Section 9 - Maintenance
Administration
System Setting
Path: Maintenance > Administration > System Setting
Enter a name for the system, and click Save.
System Date and Time
Path: Maintenance > Administration > Date and Time
You can congure your time zone, whether or not to adjust for Daylight Savings Time, and with which Network
Time Protocol (NTP) server to synchronize the date and time. You can choose to set Date and Time manually,
which will store the information on the controller’s real time clock (RTC). If the controller has access to the internet,
the most accurate mechanism to set the controller time is to enable NTP server communication.
To congure the date and time, follow the steps given below:
1. Select the controller’s time zone, relative to Greenwich Mean Time (GMT).
2. If supported for your region, click to Enable Daylight Savings.
3. Determine whether to use default or custom Network Time Protocol (NTP) servers. If custom, enter the
server addresses or FQDN.