D-Link DWC-1000 User Manual 199
Section 6 - Securing Your Network
Conguring IP Policies
Path: Security > Authentication > User Database > Groups
The following procedure describes how to congure IP-specic policies for user groups. Using this procedure,
you can allow or deny the users in a user group to log in to the wireless controllers’ web management interface
from a particular network or IP address.
1. Click Security > Authentication > User Database > Groups tab.
2. Click the Add IP Policies button. The IP Policies Conguration page will appear.
3. Complete the elds given in the table below, and click Save. The address you dened will appear in the
Dened Addresses area.
Field Description
Group Name Select a group name from the drop-down menu.
Source Address Type
Choices are:
• IP Address = species a particular IP address.
• IP Network = species an entire IP network.
Network Address/IP Address Enter the network or IP address.
Mask Length Enter a subnet mask.