D-Link DWC-1000

D-Link DWC-1000 User Manual 348
Section 9 - Maintenance
SNMP
Path: Maintenance > Management > SNMP
SNMP is an additional management tool that is useful when multiple controllers in a network are being
managed by a central Master system. When an external SNMP manager is provided with this controller’s
Management Information Base (MIB) le, the manager can update the controller’s hierarchal variables to view
or update conguration parameters. The controller as a managed device has an SNMP agent that allows the
MIB conguration variables to be accessed by the Master (the SNMP manager). The Access Control List on the
controller identies managers in the network that have read-only or read-write SNMP credentials. The Traps List
outlines the port over which notications from this controller are provided to the SNMP community (managers)
and also the SNMP version (v1, v2c, v3) for the trap.
Congure SNMP v3 User List
1. Go to Maintenance > Management > SNMP page, and click SNMP tab.
2. Right-click either admin or guest and select Edit.