D-Link DWC-1000 User Manual 360
Section 9 - Maintenance
Using the Command Line Interface
The wireless controller supports a command-line interface (CLI). The CLI lets you use a VT-100 terminal-emulation
program to locally or remotely congure, monitor, and control the wireless controller and its managed access
points via a simple text-based, tree-structured interface. The wireless controller supports SSH and Telnet
management for command-line interaction.
The following procedure describes how to access the CLI:
Note: A separately purchased USB-to-DB9F serial adapter will be helpful when connecting a PC or Linux workstation
to the console. An RJ-45-to-DB9M cable is included with the wireless controller.
1. Connect a PC with a VT-100 terminal-emulation program to the Console port on the front panel of the
wireless controller.
2. CLI login credentials are shared with the GUI for administrator users. When prompted, type cli in the
SSH or console prompt and login with administrator user credentials.
For more information, refer to the Wireless Controller CLI Reference Guide: DWC-1000.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
