D-Link DWC-1000

D-Link DWC-1000 User Manual 380
Section 10 - Troubleshooting
System Logging
Path: Maintenance > Logs Settings > System Logs
The System Logs page lets you select the type of trac passing through the wireless controller that you want to
log for display in Syslog, E-mailed logs, or the Event Viewer. This page helps in capturing the suspicious activity
such as denial-of-service attacks, general attack information, login attempts, dropped packets, and similar events.
Trac can be tracked based on whether the packet was accepted or dropped by the rewall.
Routing Logs
All Unicast Trac If enabled, tracks packets directed to the wireless controller.
All Broadcast / Multicast Trac If enabled, tracks all broadcast or multicast packets directed to the wireless controller.
FTP Logs If enabled, logged information is sent to FTP logs.
Redirected ICMP Packets
If enabled, tracks the number of redirected Internet Control Message Protocol (ICMP)
packets.
Invalid Packets If enabled, tracks the number of invalid packets received.
Bandwidth Limit If enabled, it tracks the number of packets exceeded the bandwidth range.
Remote Classication Server
Logs
By enabling this option, the logs related to WCF classication will be logged, this
option is available only when the WCF licence is enabled in device.