D-Link DWC-1000

D-Link DWC-1000 User Manual 355
Section 9 - Maintenance
Restoring Conguration Settings
Path: Maintenance > Firmware > Backup/Restore
After you use the procedure on the previous page to back up a wireless controller’s conguration, you can restore
the settings using the following procedure.
1. Click Maintenance > Firmware > Backup/Restore.
2. In the Restore to System (PC) section, click the Browse button. Use the Choose le dialog box to nd
the backup le, then click the le, and click Open. You may also restore from a USB drive connected to
one of the USB ports.
3. Click Restore. A message will appear.
4. Click OK to close the message and restore the conguration settings from the selected le.