D-Link DWC-1000

D-Link DWC-1000 User Manual 375
Section 10 - Troubleshooting
Conducting a System Check
Path: Maintenance > Management > Diagnostics > System Check
As part of the diagnostics functions on the wireless controller, you can ping an IP address. You can use this
function to test connectivity between the wireless controller and another device on the network connected to
the wireless controller.
1. Go to Maintenance > Management > Diagnostics > System Check.
2. Click Display IPv4 Table or Display IPv6 Table. The results will appear in the Command Output display
area.
Generating DBGLOGs
The link (http://<device-ip>/scgi-bin/dbglog.cgi)from the device allows the user to download
and automate the debug log (dbglog) package, grouping of system status, statistics, and support logs that are
useful for D-Link support to evaluate and diagnose the controller issues.