D-Link DWC-1000 - Package Contents; Required Tools and Information

D-Link DWC-1000 User Manual 17
Section 1 - Product Overview
After you complete the Basic Planning Worksheet, select a location for the wireless controller. The ideal location
should:
• Be at and clean, with no dust, water, moisture, or exposure to direct sunlight or vibrations.
• Be fairly cool and dry, and does not exceed 104° F (40° C).
• Not be prone to variations in temperature and humidity, or close to strong magnetic elds or a device
that generates electric noise.
• Not place the wireless controller next to, on top o, or below any device that generates heat or will block
the free ow of air through the wireless controller’s ventilation slots. Leave at least 3 feet (91.4 cm) clear
on both sides and rear of the controller.
• Allow you to reach the wireless controller and all cables attached to it.
• Have a working AC power outlet that is not controlled by a wall switch that can accidentally remove
power to the outlet.
Package Contents
Each wireless controller package contains the following items:
• One D-Link DWC-1000 Wireless Controller
• One power adapter
• One RJ-45 to DB-9 console cable
• One 3-foot Ethernet Category 5 UTP/straight-through cable
• One Reference CD-ROM containing product documentation in PDF format
• Two rack-mounting brackets
• Quick Installation Guide
Required Tools and Information
You will need the following additional items to install your wireless controller:
• D-Link DWL-2600AP, DWL-3600AP, DWL-3610AP, DWL-6600AP, DWL-6700AP, DWL-8600AP, DWL-6610AP,
DWL-8710AP, and/or DWL-8610AP access points.
• A computer with a supported web browser for conguration:
• Microsoft Internet Explorer 9.0 or higher
• Mozilla Firefox 20 or higher
• Apple Safari 5.0 or higher (Windows)
• Apple Safari 5.0 or higher (iOS)
• Google Chrome 25 or higher
• Opera 12.0 or higher