D-Link DWC-1000 User Manual 119
Section 4 - Advanced WLAN Conguration
3. Complete the elds in the table below and click Save.
Field Description
SSID
Enter a name of your wireless network. Be sure SSID is the same for all device in your
wireless network and is case-sensitive.
Captive Portal Type
Captive Portal type is selected per SSID basis. There are four types of access on a SSID:
• Free: No authentication is required for users connected to this SSID if this option is
selected.
• SLA (Service Level Agreement): If this is selected, users connected to this SSID needs
to accept Service Level Agreement before accessing anything outside this SSID.
• Permanent User: When this option is selected users need to get authenticated before
accessing data outside this SSID. Only permanent Captive Portal users can login from
this SSID.
• Temporary User: When this option is selected users need to get authenticated before
accessing data outside this SSID. Only temporary Captive Portal users created by
frontdesk user can login from this SSID.
• Billing User: When this option is selected users need to get authenticated before
accessing data outside this SSID. The temporary Captive Portal billing users created
via online wireless service purchasing. The wireless service packages are dened in
Login Prole.
Authentication Server
If Captive Portal Type = Permanent User, select the authentication server.
All users that log in to the captive portal for this SSID are authenticated through the
selected server. The available authentication servers are Local User Databass, Radius
Server, LDAP Server, or POP3.
Authentication Type
If Captive Portal Type = Permanent User and Authentication Server = RADIUS server,
select the authentication type: PAP, CHAP, MSCHAP, or MSCHAPV2.
Login Prole Name
If Captive Portal Type = Permanent User or Temporary User, select the Login Prole.
Any of the available proles can be used for this SSID.
Hide SSID
You can hide the SSID broadcast to discourage stations from automatically discovering
your access point(s). When the broadcast SSID of the AP is hidden, the SSID name is not
displayed in the list of available SSID on a client station. Instead, the client must have the
exact SSID name congured in the supplicant before it is able to connect.
Disabling the broadcast SSID is sucient to prevent clients from accidentally connecting
to your network, but it will not prevent even the simplest of attempts by a hacker to
connect or monitor unencrypted trac.
ON = SSID is hidden
OFF = SSID is broadcasted
To Next Page
Loading...
Need help?
General
Weight and Dimensions
