D-Link DWC-1000 User Manual 153
Section 5 - Advanced Network Conguration
The UPnP Port map List has the details of UPnP devices that respond to the router’s advertisements. The fol-
lowing information is displayed for each detected device:
• Active: A yes/no indicating whether the port of the UPnP device that established a connection is cur-
rently active.
• IP Address: The IP address of the UPnP device detected by this controller.
• Protocol: The network protocol (i.e. HTTP, FTP, etc.) used by the DWC.
• Int. Port (Internal Port): The internal ports opened by UPnP (if any).
• Ext. Port (External Port): The external ports opened by UPnP (if any).
• Click Refresh to refresh the port map table and search for any new UPnP devices.
To Next Page
Loading...
