EasyManuals Logo

D-Link DWC-1000 User Manual

D-Link DWC-1000
390 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
D-Link DWC-1000 User Manual 80
Section 4 - Advanced WLAN Conguration
Field Description
Assign Queue ID
This eld is visible only if the Action is Permit. Use this eld to specify the hardware
egress queue identier used to handle all the packets matching this ACL Rule. Enter
an identifying queue number (0 to 7) in the appropriate eld.
Logging
When set to True, logging is enabled for this ACL rule (subject to resource availability
in the device).
Match Every
Requires a packet to match the criteria of this ACL. Select True or False from the
options. Match Every is exclusive to the other ltering rules, so if Match Every is True,
the other rules do not appear on the screen. False indicates that it is not mandatory
for every packet to match the selected ACL Rule.
CoS
Species the 802.1p user priority to compare against an Ethernet frame. Requires a
packet’s class of service (CoS) to match the CoS value listed here. Enter a CoS value
between 0 to 7 to apply this criteria.
Source MAC
Requires a packet’s source port MAC address to match the address listed here. Enter a
MAC address in the appropriate eld. The valid format is xx:xx:xx:xx:xx:xx.
Source MAC Mask
If desired, enter the MAC mask for the source MAC address to match. Use Fs and
zeros in the MAC mask, which is in a wildcard format. An F means that the bit is not
checked, and a zero in a bit position means that the data must equal the value given
for that bit. The valid format is xx:xx:xx:xx:xx:xx.
Destination MAC Address
Requires an Ethernet frames destination port MAC address to match the address listed
here. Enter a MAC address in the appropriate eld. The valid format is xx:xx:xx:xx:xx:xx.
Destination MAC Mask
If desired, enter the MAC Mask associated with the Destination MAC to match. The
MAC address mask species which bits in the destination MAC to compare against an
Ethernet frame. Use Fs and zeros in the MAC mask, which is in an wildcard format. An F
means that the bit is not checked, and a zero in a bit position means that the data must
equal the value given for that bit. For example, if the MAC address is aa:bb:cc:dd:ee:,
and the mask is 00:00::::, all MAC addresses with aa:bb:xx:xx:xx:xx result in a
match (where x is any hexadecimal number).
Ethertype Key
Requires a packet’s EtherType to match the EtherType you select. Select the Ethertype
value from the dropdown menu. If you select User Value, you can enter a custom
EtherType value.
Custom Value
This eld appears only if you select User Value from the EtherType dropdown list. The
value you enter species a customized EtherType to compare against an Ethernet
frame. The valid range of values is (0x0600 to 0xFFFF).

Table of Contents

Other manuals for D-Link DWC-1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DWC-1000 and is the answer not in the manual?

D-Link DWC-1000 Specifications

General IconGeneral
Ethernet LANYes
Wi-Fi standards802.11a, 802.11b, 802.11g
Networking standardsIEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3ad, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Number of managed Wi-Fi Access Points (max)6
Security algorithms3DES, DES, WEP, WPA, WPA2
USB 2.0 ports quantity2
Ethernet LAN (RJ-45) ports4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
CertificationFCC B, CE B, VCCI, C-tick, IC, cUL, LVD (EN60950-1)
Built-in displayNo
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Power requirementsDC 12V/2.5A
Power consumption (typical)19.3 W
Pallet width1200 mm
Pallet length1100 mm
Pallet height (air)1419 mm
Pallet height (sea)1847 mm
Pallet gross weight (air)415236 g
Pallet gross weight (sea)545648 g
Quantity per pallet (air)144 pc(s)
Quantity per pallet (sea)192 pc(s)
Shipping (inner) case width296 mm
Shipping (inner) case height428 mm
Shipping (inner) case length354 mm
Shipping (inner) case weight10826 g
Shipping (inner) case net weight10016 g
Number of cartons per pallet (air)36 pc(s)
Number of cartons per pallet (sea)48 pc(s)
Quantity per shipping (inner) case4 pc(s)
Weight and Dimensions IconWeight and Dimensions
Package depth396 mm
Package width273 mm
Package height80 mm
Package weight2504 g
Dimensions (WxDxH)280 x 180 x 44 mm

Related product manuals