User's Manual
78
●
When the uploaded image is half-length photo or full-body photo, the system
automatically selects the frame of the uploaded image and only the face area will be
retained.
●
When there are multiple faces in the uploaded images, the system automatically
identifies the faces in the images and uploads multiple face images according to the
number of faces recognized. See Figure 6-29. Select face image you want to upload.
Blue frame means that it is selected.
●
Click
Cancel to cancel all checked face images.
Step 5 Click
OK and import face image.
Point to the face image and click Change Picture to change it.
Step 6 Fill in face image information.
Figure 6-25 Face information
Step 7 Click Save and continue or OK.
●
Click
Save and Continue to add to save current face image information and add
another human face image.
●
Click
OK to save current face image information and complete registration.
After adding the image, at the lower-left corner of the human face image, there is an icon
. It means device that face abstracting in process. See "6.3.3.4.6 Managing Face Pictures"
for detailed information.
Batch Import
Before the batch import, name the face image according to the following rule:
"Name#SGender#BBirthday#NNation#PProvince#TIDtype#MIDnumber#AAddress.jpg" (such
as"Tim#S1#B20000101#NCN#PZheJiang#T1#M0000#AAddress").
Name the face image according to the rule. After successful import, the system will identify the face
To Next Page
Loading...
Need help?
General
